The variety of problems some users who upgraded to Windows 10, is truly astounding. While the upgrade went smoothly for me on all my devices, several users have been facing a plethora of Windows 10 problems. While Microsoft has been quick to release several automated solutions to fix Windows 10 issues, the frustration among some who still face issues is understandable. There is one set of users who are facing Printer problems after upgrading from Windows 8.1 or Windows 7 to Windows 10. Some are reporting that the Printer is not being detected or recognized, the Printer is disconnecting, Printer cannot scan or print, Printer or Scan is busy or in use and Printer is offline kind of messages.

• Mhotspot Driver Problem Found
• Mhotspot Download Windows 7
• Mhotspot Download For Windows 10

I think the problem is that, when I enable the sharing option on my wifi, it states that it is shared. But, once I open mHotspot and try to route it, the 'shared' thing goes away. And, when I open to see, then it shows that the sharing has been disabled. So, the websites did not help either. Please help!! Driver problem start mhotspot again. How to wireless internet sharing with mobil nokia lumia 710 to laptop? Internet sharing between laptop and tv using sony uwa-br100 wireless lan adaptor? Mhotspot driver problem fixed please start hotspot again.

Microsoft has updated and released its Printer Troubleshooter to specifically fix issues being faced by users in Windows 10.

Printer Troubleshooter for Windows 10

This Printer troubleshooter will check if:

1. You have the latest Printer drivers, and fix and or update them
2. If you have connectivity issues
3. If the Print Spooler and required Services are running fine
4. Any other Printer related issues.

What this Troubleshooter fixes:

• You are unable to install a printer, connect to a printer, or print more than one job at a time
• You receive an error indicating your Print Spooler service is experiencing problems
• You receive an error indicating your <PRINTERNAME> is not the default printer
• You receive an error indicating: <PRINTERNAME> cannot be contacted over the network
• Identify if your printer is turned off
• Identify if your printer toner is low or empty causing your print job to appear faint or it does not print at all
• Identify if your printer paper is low or empty
• Identify if the printer has a paper jam which is preventing it from operating normally
• Identify if a print job that is in the print queue is preventing other print jobs from printing
• Identify if you need to update your print driver
• You receive an error stating that your Plug and Play printer %PRINTERNAME% has encountered a driver problem

To bring up the built-in Printer Troubleshooter, open Run box, type the following and hit Enter:

Else you can click hereto download its latest version from Microsoft.

Once you have opened the Troubleshooter from Microsoft, connect your Printer and run it. Next, select the Printer and move forward. Once the run is completed and problems detected, it will offer to fix the problems for you.

Cannot print in Windows 10

If this does not help and you are still facing problems, your printer may need a new driver. To do this, open Start, enter Devices and Printers and select it.

Select your Printer. Then select Remove device from the top of the window.

Now if Windows doesn’t automatically find a new driver, search on the device manufacturer’s website and follow their download and installation instructions.

Tip: The Touch Keyboard Troubleshooter from Microsoft will help you fix problems with the Touch keyboard.

Other posts that will help you fix printer-related issues:

1. Printer will not print or User Intervention is required.
2. Cancel a jammed or stuck Print Job queue.

Related Posts:

-->

Installing a release-signed driver is the same as described in Installing, Uninstalling and Loading the Test-Signed Driver Package in Test Signing, except for two additional steps needed when installing using any of the four methods described there. Using the Add Hardware Wizard to install a release-signed driver shows the additional two steps, including some common installation issues.

1. Open an elevated command window
2. Run hdwwiz.cpl to start the Add Hardware Wizard, and click Next to go to the second page
3. Select Advanced Option and click Next
4. Select Show all devices from the list box and click Next
5. Select the Have Disk option
6. Enter the path to the folder that contains the C:toaster driver package
7. Select the inf file and click Open
8. Click OK
9. Click Next in the next two pages, and then click Finish to complete the installation
10. Click Install on the dialog box that asks “Would you like to install this device software?”
11. Click Finish to complete the installation.

Step 10 shows the following Windows Security dialog box.

Selecting the check box will not show this dialog box again in the computer if the driver is installed again if the driver is removed for any reason.

Note The system verifies that publisher information is accurate based on the SPC that was used to sign the catalog. If the publisher trust level is unknown—as will be true for Contoso.com—the system displays the dialog box. For the installation to proceed, the user must click Install. For more information on trust and driver installation, see Code-Signing Best Practices.

An unsigned driver on the other hand will show the following dialog, which allows a user to install an unsigned driver, which may not work in x64 version of Windows.

Verify that the Release-Signed Driver is Operating Correctly

Use Device Manager to view the driver Properties as described before with respect to the test-signed driver. Below is the screen shot to show if the driver is working.

Troubleshoot Release-Signed Drivers

The following list gives several common ways to troubleshoot problems with loading signed or test signed drivers:

• Use the Add Hardware Wizard or Device Manager to check whether the driver is loaded and signed, as described in Verify that the Test-Signed Driver Is Operating Correctly of Test Signing.
• Open the setupapi.dev.log file created in the Windowsinf directory after driver install. Refer to the section on setting the registry entry and renaming of the setupapi.dev.log file before installing the driver.
• Check the Windows security audit log and Code Integrity event logs.

Analyzing the Setupapi.dev.log File

As explained before, any driver installation information will be logged (appended) on the setupapi.dev.log file in the Windowsinf directory. If the file is renamed before a driver is installed, a new log file will be generated. A new log file will be easier to look for important logs for a new driver install. The log file opens in Notepad application.

The first left most column may have a single exclamation mark “!” or multiple exclamation marks “!!!”. The single mark is kind of a warning message, but the triple exclamation mark will be an indication of a failure.

You will see the following single exclamation mark when you install a driver package release signed with a CA vendor provided SPC certificate. These are just warnings to indicate that the cat file has not been verified yet.

Mhotspot Driver Problem Found

If you now refer to step 10 of driver install and click on the “Install” button, you will see the below log after which in most cases the driver will install and load fine. The Device Manager will not report any errors or a yellow bang for the driver.

Despite getting up to the above point the driver may not be loaded if you also see the following error log in the log file.

The setupapi.dev.log file has also reported the following error:

Mhotspot Download Windows 7

Note that 0x34 is Code 52.

At this point you may go back in the log file and try to find if any driver binary has been signaled with any exclamation marks. That may provide some clue. Even otherwise, you should run the “signtool verify” command described before on the cat file and other embed signed binaries to make sure that there is no issues in signing the driver.

Most of the time the log file information is sufficient to resolve the issue. If the above checking fails to find the root cause, then the next approach is to check the Windows security audit log and code Integrity event logs which is described in the next section.

The setupapi.dev.log file also helps tracking driver file copy and commit time information in case if it is found that a driver service failed to start as the service binary file copy has not been committed but the OS tries to start the service. But a restart successfully starts the service. See the sequence of operation below in the log file.

Next at a later time:

Then we have the file copy operation:

The file is committed next. Compare the end time with the start time.

Mhotspot Download For Windows 10

The above was case of driver update which worked fine in Windows 7, but failed in Windows 8.0 and 8.1, which led to a discovery of a bug.

Using the Windows Security Audit Log

If the driver failed to load because it lacked a valid signature, audit failure events are recorded in the Windows security log indicating that Code Integrity could not verify the image hash of the driver file. The log entries include the driver file's full path name. The security log audit events are generated only if the local security audit policy enables logging of system failure events.

Note The security audit log must be explicitly enabled. For more information, see Appendix 3: Enable Code Integrity Event Logging and System Auditing.

To examine the security log:

1. Open an elevated command window.
2. To start Windows Event Viewer, run Eventvwr.exe. Event Viewer can also be started from the Control Panel Computer Management application.
3. Open the Windows security audit log.
4. Check the log for system integrity events, which have an event ID of 5038.
5. Double-click the log entry to display its Event Properties dialog box, which provides a detailed description of the event.

The screen shot below shows the Event Properties dialog box for a security audit log event that was caused by an unsigned Toaster.sys file.

Using the Code Integrity Event Operational Event Log

If the driver failed to load because it was not signed or generated an image verification error, Code Integrity records the events in the Code Integrity operational event log. Code Integrity operational events are always enabled.

The Code Integrity events can be viewed with Event Viewer.

To examine the Code Integrity operational log

1. Open an elevated command window.
2. To start Windows Event Viewer, run Eventvwr.exe. Event Viewer can also be started from the Computer Management Control Panel application.
3. Open the Windows Code Integrity log.
4. Double-click a log entry to display its Event Properties dialog box, which provides a detailed description of the event.

The screen shot below shows the Event Properties dialog box for a Code Integrity operational log event that was caused by an unsigned Toaster.sys file.

Using the Informational Events in the Code Integrity Verbose Log

The Code Integrity informational log's verbose view tracks events for all kernel-mode image verification checks. These events show successful image verification of all drivers that are loaded on the system.

To enable the Code Integrity verbose view:

1. Start Event Viewer, as in the previous example.
2. Click the Code Integrity node to give it focus.
3. Right-click Code Integrity and select the View item from the shortcut menu.
4. Select Show Analytic and Debug Logs. This creates a sub tree with two additional nodes: Operational and Verbose.
5. Right-click the Verbose node and select the Properties from the shortcut menu.
6. On the General tab, select Enable Logging to enable the verbose logging mode.
7. Reboot the system to reload all kernel-mode binaries.
8. After rebooting, open the MMC Computer Management snap-in and view the Code Integrity verbose event log.

A few additional known driver signing issues are described in Appendix 4: Driver Signing Issues.